Genesis Electrified GV70 - Page 340

6-12
Driving your vehicle
R (Reverse)
Use this position to drive the vehicle
rearward.
OJKEV061007OJKEV061007
To shift the gear to R (Reverse), rotate
the rotary gear shift dial to R (Reverse)
while depressing the brake pedal.
When the vehicle is stopped in the
R (Reverse) position, if you open the
driver’s door, the gear will automatically
shift to P (Park).
However, if the vehicle is in motion, the
gear may not automatically shift to P
(Park) to prevent reduction gear damage.
The direction of the rotary gear shift dial
is the same as that of the wheel.
NOTICE
Always come to a complete stop before
shifting into or out of R (Reverse); you
may damage the reduction gear if you
shift into R (Reverse) while the vehicle is
in motion.
N (Neutral)
OJKEV061008OJKEV061008
To shift the gear to N (Neutral), rotate the
shift dial clockwise from R (Reverse) or
counterclockwise from D (Drive) while
depressing the brake pedal.
Always depress the brake pedal when
you are shifting from N (Neutral) to
another gear.
When the READY indicator is off
with the gear in N (Neutral), the gear
automatically shifts to P (Park), and the
Electronic Parking Brake (EPB) applies
automatically.
However, if you need to stay in N
(Neutral) with the vehicle off, refer to “To
stay in N (Neutral) when vehicle is OFF”
in the following page.
CAUTION
The vehicle can be started with the gear
in N (Neutral), but for you safety, be
sure to start the vehicle with the gear in
P (Park).