7-36
Driver assistance system
OJKEV072230LOJKEV072230L
When the vehicle is restarted with Blind-
Spot Collision-Avoidance Assist off, the
‘Blind-spot safety system is Off’ message
will appear on the cluster.
If you change the setting from ‘Off’
to ‘Active assist’ or ‘Warning only’, the
warning light on the outside rearview
mirror will blink for three seconds.
In addition, if the vehicle is turned on,
when Blind-Spot Collision-Avoidance
Assist is set to ‘Active assist’ or ‘Warning
only’, the warning light on the outside
rearview mirror will blink for three
seconds.
•
•
Information
If the vehicle is restarted, Blind-Spot
Collision-Avoidance Assist will maintain
the last setting.
Warning timing
OJKEV072003LOJKEV072003L
With the vehicle on, select ‘Driver
assistance → Warning timing’ from the
Settings menu to change the initial
warning activation time for Blind-Spot
Collision-Avoidance Assist. The warning
time can be set to either ‘Normal
(Standard)’ or ‘Later’.
• Use 'Normal (Standard)' in normal
driving conditions. If the Warning
timing seems sensitive, change it to
'Later'.
• If 'Later' is selected, Blind-Spot
Collision-Avoidance Assist, warns the
driver more slowly.
Information
If you change the Warning timing, the
Warning timing of other Driver Assistance
systems may change.
To Next Page
Loading...
