1-41
01
How to Connect Portable Charger
(ICCB: In-Cable Control Box)
ORG3EVQ011074LORG3EVQ011074L
1. Connect the plug to a household
electric outlet.
OJKEVQ011068OJKEVQ011068
2. Check if the power lamp (green)
illuminates on the control box.
3. Depress the brake pedal and apply the
parking brake.
4. Turn OFF all switches, shift to P (Park),
and turn OFF the vehicle.
If charging is initiated without the
gear in P (Park), the charging will
start, only after the gear is shifted to
P (Park).
OJKEVQ011041OJKEVQ011041
5. Push the charging door where the
triangle symbol (1) is located to open.
The charging door opens only when
the vehicle is unlocked.
Information
If you cannot open the charging door due
to freezing weather, tap lightly or remove
any ice near the charging door. Do not try
to forcibly open the charging door.
6. Open the protection caps of the
charging connector and the charging
plug. Check if there are any foreign
substances or dust.
7. Hold the charging connector handle
and connect it to the vehicle charging
inlet. Push the connector all the way
in. If the charging connector and
charging terminal are not connected
properly, this may cause a fire and
charging may not start.
To Next Page
Loading...
