7-95
07
• Changing lanes
OJKEV071100OJKEV071100
[A]: Your vehicle, [B]: Lane changing vehicle
When a vehicle moves into your lane
from an adjacent lane, it cannot be
detected by the sensor until it is in the
sensor's detection range. Smart Cruise
Control may not immediately detect
the vehicle when the vehicle changes
lanes abruptly. In this case, you must
maintain a safe braking distance, and
if necessary, depress the brake pedal
to reduce your driving speed in order
to maintain a safe distance.
• Situations when detecting are limited
OJKEV071136OJKEV071136
OJKEV071102OJKEV071102
In the following cases, some vehicles,
pedestrians or animals in your lane
cannot be detected by the sensor:
• Vehicles offset to one side
• Slow-moving vehicles or sudden-
decelerating vehicles
• Vehicles with higher ground
clearance or vehicles carrying loads
that stick out of the back of the
vehicle
• Vehicles that has the front lifted
dueto heavy loads
• Vehicles within approximately 2 m
(6 ft.) from your vehicle
• Oncoming vehicles
• Stopped vehicles
• Vehicles with small rear profile, such
as trailers
To Next Page
Loading...
