7-117
07
• Highway lane change assist does not
operate on the entrance or exit of the
highway.
OJKEV071150OJKEV071150
OJKEV071151 OJKEV071151
Highway Lane Change Assist standby
Highway Lane Change Assist function
will be in the standby state when one of
the ready state condition is not satisfied,
or when entering or driving on one of the
following roads:
• Road within a certain distance from
the tollgate on the main road of the
highway (or motorway)
• The road ahead ends without an
interchange or junction
• Road with sharp curves
• Road with narrow lanes
• Road that is under construction
Highway Lane Change Assist cancel
The function will be cancelled when:
• The turn signal lever is moved to the
A position while the Highway Lane
Change Assist function is operating
and placed in the center (1) before
stepping on the lane line.
• The turn signal lever is turned on in
the opposite direction of lane change
• The steering wheel is steered sharply
To Next Page
Loading...
