Need help?Do you have a question about the Genio MPS2000 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Protection | Short Circuit, Overload |
| Connectors (Input) | 1/4" |
| Power Supply | AC 230V, 50Hz |
Illustrates the physical connections for the MPS2000 unit.
Details the controls and indicators on the front of the MPS2000 unit.
Describes the ports and connections on the rear of the MPS2000 unit.
Instructions for using the MPS2000 in silent mode via headphones.
Guide to selecting from the 16 available pre-set instrument sounds.
Instructions for selecting user-defined sound settings.
Procedure for selecting sounds from the General MIDI sound set.
Steps to apply or modify sound effects and variable parameters.
Detailed steps for editing and customizing user-defined sound sets.
Guide to renaming custom user-defined sound sets.
Explanation of parameters available for editing instrument sounds.
Overview of the built-in metronome functions and settings.
Adjusting the tempo (BPM) of the metronome.
Setting the time signature (beats per measure) for the metronome.
Selecting different rhythmic patterns for the metronome.
Adjusting the volume level of the metronome.
Instructions for recording musical performances using the built-in recorder.
How to play back recorded performances.
Playing the pre-recorded demonstration song.
Adjusting the touch sensitivity of the piano keys.
Technical details of MIDI messages transmitted and received by the MPS2000.
Chart detailing MIDI note numbers for drum sounds.
Mapping of General MIDI program numbers to instrument sounds.
Procedure for calibrating the piano's key sensors.
Method for fine-tuning sensitivity for individual piano keys.
Connecting the MPS2000 to audio systems like amplifiers.
Connecting the MPS2000 to computers or synthesizers via MIDI.
To Next Page