Genio MPS2000 - How to Select User-set

MPS2000
10
󳢯 Press either [◀] DATA or DATA [▶] button to choose one of the 16 User-set sounds that were set in
factory when out of factory.
How to Select User-set
󳢯 Press both the [◀] DATA and the DATA [▶] buttons together, then Preset should be U1: Pipe Organ
1 from any sounds.
󳢯 U1: Pipe Organ 1 is default sounds when turn the MPS2000 on.
User-set Chart