English
-12-
GETTING STARTED
Preparation
1. Attach the camera strap.
2. Open the battery cover.
3. Load the batteries with correct orientation as
shown.
4. Close the battery cover and make sure it is
locked securely.
5. Insert an SD/SDHC memory card.
The camera has 16MB internal memory
(13.5MB available for image storage),
but you can load an SD/SDHC memory
card (SDHC memory card up to 4GB) to
expand the camera’s memory capacity.
Be sure to format the memory card with
this camera before its initial usage.
NOTE
To prevent valuable data from being accidentally erased from an SD/SDHC memory card
you can slide the write-protected tab (on the side of the SD/SDHC memory card) to
“LOCK”.
To save, edit or erase data on an SD/SDHC memory card, you must unlock the card.
To prevent damaging of an SD/SDHC memory card, be sure to turn off the power when
inserting or removing the SD/SDHC memory card. If inserting or removing the SD/SDHC
memory card with the power on, the camera will automatically turn off.
To Next Page
Loading...
Need help?
General
