English
-19-
Default Setting and Validation
The following table indicates the camera’s default setting as well as its validation.
Always: The settings always keep valid.
One Time: The setting is only valid once or till camera power is off.
Validation Default Factory Setting
Resolution Always High for Movie
Standard for Picture
Exposure One Time 0EV
Sharpness One Time Level 5
White Balance One Time Auto
Motion Stabilization Always Off
Motion Detect One Time Off
Two in One One Time Off
Photo Frame One Time Off
Flash Always Off
Self-Timer One Time Off
Multi-Snap One Time Off
Backlight Mode One Time Off
Date Printing Always Off
Effect One Time Normal
Sound Always On
Format Card One Time Off
TV System Always Depends on shipping area
Language Always Depends on shipping area
Volume Always Level 6
Movie Mode Setting
Record main menu includes camera setting and other advanced settings. You can
use Right/Left Buttons to move between the options and press Enter to validate the
setting.
Movie Resolution
To change Movie Resolution:
1. In Movie/Picture Record Mode, press Enter Button to switch to record menu
screen.
2. Use Right/Left Buttons to select Movie Mode. Submenu of Movie Mode will pop
out on the screen.
3. Use Up/Down Buttons to select Resolution then press Enter Button to switch to
Resolution submenu.
To Next Page
Loading...
