6
Local Manual Call Point
EN54 information
Optional functions with requirements of European standard
The Control panel complies with the requirements of EN54-2 : 1997. In addition to
the basic requirements of the standard the panel conforms to the following optional
clauses:
Clause Description
7.8 Output to fi re alarm devices
7.9 Control of Fire Alarm Routing Equipment FARE
(options with requirements) sub clause:
7.9.1 Output to FARE
7.10 Output to Fire Protection Equipment FPE
(options with requirements) sub clause:
7.10.1 Output Type A
7.11 Delays to action outputs
7.12 Dependencies on more than one alarm signal
(options with requirements) sub clause:
7.12.3 Type C dependency
8.3 Fault signals from point
9.5 Disablement of each addressable point
10 Test condition
To Next Page
Loading...
