instrument ON whilst charging or charged is displayed, the operator will need to press and hold
the power key briefly.
Note: Once the instrument is fully charged, the power supply should be disconnected from the
instrument.
Instrument: Input: 5Vdc ± 0.5V (max 1000mA)
Power Supply: Input: 100 -240Vac 60/50Hz 120mA
Output: 5Vdc 1000mA (5VA)
Note: A full charge will take approximately 4 hours. Typically, a fully charged battery will last 10-
12 hours.
When the instrument is already powered on, the operation is slightly different as the battery icon
changes to a flashing plug symbol. This will stop flashing when the charge is complete.
To Next Page
Loading...
