Geotech G110 - Hold Reading

Page 29 of 48
Operating Manual
www.geotechuk.com
OMG100N Iss.02
© QED Environmental Systems Ltd.
G 1 0 0 R A N G E
Hold Reading
The ‘Hold Reading’ option allows the user to freeze the currently displayed reading. This allows it to
be manually recorded or moved away from the sample point. Once activated, press the soft-key
‘Hold’ and the readings are fixed until the ‘Hold’ key is pressed again or by storing the reading.
The current mode of operation can be identified by the status of the soft-key which is inversed whilst
in the hold phase.
Screen 13 - Hold reading