October 29, 2015
10
5. Optional Devices for GV-AS100 / 110 / 120
To access GV-AS100 / 110 / 120 on a network, an optional device GV-ASBox or GV-ASNet
is required. GV-ASBox also supports connection with additional input devices, output devices
and readers through Wiegand interface and RS-485 interface. GV-ASNet supports additional
readers through RS-485 connection.
You will need to first complete the physical wiring of GV-ASBox or GV-ASNet before
accessing the Web interface. After the controller is installed on a network, GV-AS100 / 110 /
120 can also connect with GV-ASManager for advanced settings. Refer to 4. Setting GV-AS
Controller on GV-ASManager for details.
To Next Page
Loading...
Need help?
General
