October 29, 2015
4
1.3 GV-AS120
3.2.1 Connecting a Wiegand Reader
Connect card readers (Optional)
Connect AS120 to a reader through Wiegand
interface.
Connect input devices
Connect AS120 to input devices (Ex: a push
button to exit).
3.2.2 Connecting Input Devices
Connect output devices
Connect AS120 to output devices (Ex: a door
lock).
3.2.3 Connecting Output Devices
Connect to PC
Connect AS120 to a computer through RS485
connection or network connection.
Connect to Power
Connect AS120 to power using the supplied 12V
DC adaptor.
3.2.5 Connecting the Power
RS485 Connection
3.2.4.A RS-485 Connection
Network Connection
3.2.4.B Network Connection
Add and delete cards
Create an Enroll Card and a Delete Card to add
and delete cards.
3.3 Programming Mode
GV-AS120
To Next Page
Loading...
