Administrator Mode
153
4 4
[Date & Time on GV-IP Camera] Displays the current date and time on
the camera.
[Time Zone] Sets the time zone for local settings. Select Enable Daylight
Saving Time to automatically adjust the camera for daylight saving time.
Type the Start Time and End Time to enable the daylight saving function.
For GV-BX12201 firmware V1.02 or later, you can also select which day of
a week within a month to apply the DST setting.
To play back, see 5.2.4 Playback of Daylight Saving Time Events. To
automatically synchronize the Daylight Saving Time with the GV-DVR /
NVR, see 7.1.1 Customizing IP Camera Settings on GV-DVR / NVR.
[Synchronized with a Network Time Server] By default, the camera uses
the timeserver of time.windows.com
to automatically update its internal
clock every 24 hours. You can change the host name or IP setting to the
timeserver of interest, and specify a time for time update.
[Synchronized with your computer or modify manually] Manually
changes the camera’s date and time. Or, synchronize the camera’s date
and time with those of the local computer.
[Date and Time Overlay Setting] Select the display format of date and
time stamps on the image. For this function to work, you must also enable
the Overlaid with date stamps and Overlaid with time stamps options in
Figure 4-2.
To Next Page
Loading...
Need help?
General
