xvii
Note for Recording
1 By default, the images are recorded to the memory card inserted in
the GV-IP Camera (except GV-IR Arctic Box Camera and Target
Series, which are not equipped with a memory card slot). Make
sure the Write recording data into local storage option (see
3.1.1 Video Settings) is enabled. If this option is disabled, the
camera will stop recording to the memory card while the live view is
accessed through Web browsers or other applications.
2 Mind the following when using a memory card for recording:
• Recorded data on the memory card can be damaged or lost if
the data are accessed while the camera is under physical
shock, power interruption, memory card detachment or when
the memory card reaches the end of its lifespan. No
guarantee is provided for such causes.
• The stored data can be lost if the memory card is not
accessed for a long period of time. Back up your data
periodically if you seldom access the memory card.
• Memory cards are expendable and their durability varies
according to the conditions of the installed site and how they
are used. Back up your data regularly and replace the
memory card annually.
• Replace the memory card when its read/write speed is lower
than 6 MB/s or when the memory card is frequently
undetected by the camera.
3 It is recommended to use memory cards of the following setting
and specifications:
• Apply a battery backup (UPS) to avoid power outage.
• Use Micro SD card of MLC NAND flash, Class 10 for better
performance.
To Next Page
Loading...
Need help?
General
