Recording and Playback
169
5
5.2 Playback
These methods are available to play back the video files recorded at the
camera:
• Playback from the memory card by connecting it directly to the
GV-DVR / NVR / VMS through a card reader
• Playback by using the Remote ViewLog function over the TCP/IP
network
• Playback by using the recorded files downloaded from built-in FTP
Server
5.2.1 Playback from the Memory Card
You can play back the files recorded at the GV-IP Camera by connecting
the memory card to GV-DVR / NVR / VMS through a card reader. However,
the videos on GV-IP devices are recorded in the Linux format and GV-DVR
/ NVR / VMS runs on a Windows-based computer. For Linux files to be
readable and accessible on Windows, we use the Ext2Fsd program. Follow
the steps below to download, install and execute the Ext2Fsd program.
IMPORTANT:
1. Due to the compatibility issue, the Ext2Fsd program is required for
GV-IP Camera firmware V2.07 or later.
2. The Ext2Fsd program only works on Windows 2000, XP, 2003,
vista, 7, 8 and Server 2012 (32-bit and 64-bit).
3. The Ext2Fsd program is subject and under term/condition of The
GNU General Public License version 2 (GPLv2). Please read
http://www.gnu.org/licenses/gpl-2.0.html
before installation.
To Next Page
Loading...
Need help?
General
