DVR Configurations
211
7
7.3 Remote Monitoring with Multi View
You can use the Multi View to monitor and manage the camera.
Note: Multi View is not supported by GV-VMS.
7.3.1 Connecting to the IP Camera
1. On the Multi View window, click the Edit Host button. The Edit Host
window appears.
2. To create a host, click the New button. You need to create a group
before creating a host.
3. Select GV-IP Camera, GV-IP Speed Dome from the Device drop-
down list. Type the host name, IP address, user name and password
of the camera. Modify the default VSS port 10000 if necessary.
Figure 7-11
4. Click Save to establish connection.
For details on the Multi View functions, see “Multi View Viewer”, Remote
Viewing, DVR User’s Manual on the Surveillance System Software DVD.
To Next Page
Loading...
Need help?
General
