20
Chapter 3 Accessing the Camera
Two types of users are allowed to log on to the GV-IPCAM:
Administrator and Guest. The Administrator has full access to all
system configurations, while the Guest can only access the live view
(except the Camera Adjustment settings) and network status.
3.1 Accessing Your Surveillance Images
Once installed, your camera is accessible on a network. Follow these
steps to access your surveillance images:
1. Start your web browser.
2. Enter the IP address or the domain name of the camera in the
Location/Address field of your browser.
Figure 3-1
3. Enter the login name and password.
• The default login name and password for Administrator are
admin.
• The default login name and password for Guest are guest.
To Next Page
Loading...
Need help?
General
