GeoVision GV-NVR System Lite V2 User Manual

6
Chapter 3 Getting Started
There are two methods to mount the GV-NVR System Lite V2. One is to use the base stand to
support the unit to stand. The other is to use the VESA monitor mount to mount the unit on the
back of the computer monitor.
3.1 Installing Base Stand
2
1
Figure 3-1
1. Attach the base stand to the GV-NVR System Lite V2.
2. Tighten the base stand screw.

GeoVision GV-NVR System Lite V2 Specifications

General

Brand	GeoVision
Model	GV-NVR System Lite V2
Category	Network Hardware
Language	English