Getting Started
31
3
3.9 Exiting to Windows
The GV-NVR System Lite V2 is protected by GV-Desktop that is limited to run the selected
programs. If you need to exit to Windows desktop, follow these steps.
1. On the GV-Desktop, click the Settings button, and type the valid ID and password. The
default ID and Password are “0000”. The Settings dialog box appears.
2. Under Desktop Type, select Windows from the drop-down list, and click OK.
3. Click the Log Off button, and enter the valid ID and Password. The Windows desktop
appears.
1 3 2
Figure 3-45 The GV-Desktop
To Next Page
Loading...
