GeoVision GV-NVR System Lite V2 User Manual

38
4.2 Using the IP Device Utility
The IP Device Utility provides a direct way to upgrade the firmware to multiple units of GV IP
camera. Note GV-NVR System Lite V2 used to upgrade firmware must be under the same
network of the camera.
1. On the GV-Desktop, click the Programs button. This dialog box appears.
Figure 4-2
2. Select VS Utility. This dialog box appears.
Figure 4-3
3. Click the Search button to locate available cameras on the same LAN. Or click the New
button and assign the IP address to locate the camera over the Internet. Or highlight one
camera in the list and click the Delete button to remove it.

GeoVision GV-NVR System Lite V2 Specifications

General

Brand	GeoVision
Model	GV-NVR System Lite V2
Category	Network Hardware
Language	English