GeoVision GV-NVR System Lite V2 User Manual

Getting Started
23
3
3. The Initialize and Convert Disk Wizard appears. Click Next to continue.
Figure 3-29
Note: If the Wizard does not appear, you need to initialize the drives one by one. To manually
initialize a drive, right-click on the name of the drive and select Initialize Disk.
4. The screen shows the drives you selected to initialize. Make sure all drives are checked,
and click Next to continue.
Figure 3-30

GeoVision GV-NVR System Lite V2 Specifications

General

Brand	GeoVision
Model	GV-NVR System Lite V2
Category	Network Hardware
Language	English