15
GB
Table of Contents
1. Use in accordance with the operating instructions ....................................16
2. Safety instructions .........................................................................................16
3. Working range ................................................................................................16
4. Technical data .................................................................................................16
5. Equipment and accessories ..........................................................................17
6. Starting procedure .........................................................................................17
6.1 Adjustment of mandrel length "X" ............................................................... 17
6.2 Adjustment of stroke "Y" ............................................................................. 18
6.3 Threading-on and setting of a blind rivet nut ..............................................19
6.4 Change of threaded mandrel ..................................................................... 20
6.5 Change of unthreading time .......................................................................20
7. Maintenance and service ...............................................................................20
8. Repairs ............................................................................................................21
9. Environmental notes ......................................................................................21
10. Troubleshooting .............................................................................................21
10.1 Rivet nut is not threading on .................................................................21
10.2 Set rivet nut is loose .............................................................................. 21
10.3 Threaded mandrel is not unthreading ..................................................21
11. Warranty ..........................................................................................................22
12. Conformity declaration ..................................................................................22
To Next Page
Loading...
