Getac B360 - Page 11

5
Turning Off
When you finish a working session, you can stop the system by turning off
the power or leaving it in Sleep or Hibernation mode:
To... Do this...
Power off
(Shutdown)
Click  Power  Shut down.
Sleep Use one of these methods:
 Press the power button.*
 Close the top cover.*
 Press Fn + F12.*
 Click  Power  Sleep.
Hibernate
By default, this option is not shown in the Start menu. If
you want to use the feature, set up accordingly in Windows
settings.
* “Sleep” is the default result of the action. You can change what the
action does through Windows settings.