30
An established test method in which chemical indicators are used is
the Bowie-Dick test, with test packages or its equivalent with a dispos-
able package. For information see also under “Bowie-Dick testing”.
Biological indicators
Biological indicators used when testing various types of sterilizer must
conform to European standard EN866-1, the other parts of which also
specify particular requirements for different types of indicator.
Getinge AB recommends using biological indicators in steam sterili-
zation processes. For other types of processes it the user’s responsibility
to evaluate whether individual makes are applicable to the GETINGE
sterilizer process.
Sterilizer parts for periodic replacement
Spare parts
So that correct operation and product safety can be guaranteed, parts for
recorders, printers or periodic maintenance must be genuine GETINGE
spare parts or parts approved by Getinge Infection Control. Article
numbers of genuine parts are stated in the relevant sections of the
service manual.
Sterilization media for low-temperature sterilising with
formaldehyde sterilizers
Low-temperature sterilizing can only be done with special sterilizers
intended for the purpose. During sterilizing with formaldehyde, the
medium is added from containers attached to the sterilizer.
Formaldehyde solution
Containers holding formaldehyde solution are brought to the site and
attached to the sterilizer by the operator.
Where relevant, details of concentration, volume, packaging,
handling and properties are described under Operating instructions and
under “General advice on formaldehyde sterilizers”.
Accessories
The CE marking of the autoclave makes the manufacturer liable for its
product safety and function meeting the strict requirements laid down
in relevant EC directives. Accessories which are mechanically,
electrically or in some other way connected to the autoclave must be
compatible with it. Consequently only accessories which have been
evaluated by GETINGE and have been registered as approved
accessories may be used together with the autoclave.
In the event of non-approved accessories being used,
GETINGE does not accept any product liability for the
autoclave and its CE marking.