47
Main menu 2
The top line shows the name of the phase the program is currently in.
The bottom line shows the name and id number of the sterilizer.
Main menu 3
The first line shows the name of a parameter. The bottom line shows the
current value of that parameter. Press ENTER to open a list of the
parameters in the chosen program.
Main menu 4
Print last cycle
Gives an additional printout of the log values for the latest process.. If
you press ENTER, the top line shows “EXTRA PRINTOUT?” and the
bottom line “YES” and “NO”.
Open the field for editing by pressing ENTER. Move the cursor with
the left- and right-arrow key and press ENTER to choose.
Select PACS
System menu
Entering the correct password, opens the parts of the system menu to
which the password gives access.
About
Shows information about the sterilizer, control system, panels, etc.
To Next Page
Loading...
