9
3.3. Front Panel
VH-2600
When this button is pressed power to the heater wire is turned on and the green indicator
light will be illuminated. For non-heated wire circuits, the indicator light must be off. An
alarm will occur if the heater wire function is turned off while a heated wire circuit is
connected.
To adjust the set temperature Up, each press of adjustment 0.5 ℃.
To adjust the set temperature Down, each press of adjustment 0.5 ℃.
To select the parameter to display “Airway” to ”Chamber”.
Mutes all audible alarms.
Normal mute time is 3 minutes. The alarm condition indicator
lights will continue to flash until the condition is rectified.
To Next Page
Loading...
