Gigabyte GA-F2A85X-UP4 - Advanced Memory Settings; Advanced Memory Settings Configuration

- 41 -
BIOS Setup
` Advanced Memory Settings
& AMDMemoryProle(A.M.P.)
(Note)
, System Memory Multiplier (SPD), Memory
Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
& DRAM Timing Selectable
Quick and Expertallowsthememorytimingsettingsbelowtobecongurable.Optionsare:Auto(default),
Quick, Expert.
& ProleDDRVoltage
 Whenusinganon-AMPmemorymoduleorAMDMemoryProle(A.M.P.) is set to Disabled, this item will
display as 1.50V.WhenAMDMemoryProle(A.M.P.) is set to Prole1 or Prole2, this item will display
the value based on the SPD data on the AMP memory.
& ProleVTTVoltage
The value displayed here is dependent on the CPU being used.
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranksofthememorytoincreasememoryperformanceandstability.(Default:Enabled)
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
differentchannelsofthememorytoincreasememoryperformanceandstability.(Default:Enabled)
(Note) Thisitemispresentonlywhenyouinstallamemorymodulethatsupportsthisfeature.