Gigabyte GA-F2A85X-UP4 - Configuring RAID Set in RAID BIOS Utility; RAID BIOS Utility Navigation

- 73 -
Appendix
C.ConguringRAIDsetinRAIDBIOS
EntertheRAIDBIOSsetuputilitytocongureaRAIDarray.Skipthisstepandproceedwiththeinstallationof
Windowsoperatingsystemforanon-RAIDconguration.
Step 1:
After the POST memory test begins and before the operating system boot begins, look for a message which
says"Press<Ctrl-F>toenterRAIDOptionROMUtility"(Figure2).Press<Ctrl>+<F>toentertheRAIDBIOS
setup utility.
Step 2:
Main Menu
ThisistherstoptionscreenwhenyouentertheBIOSRAIDSetuputility.(Figure3).
Toviewthediskdrivesassignedtoarrays,press<1>toentertheView Drive Assignments window.
Tocreateanarray,press<2>toentertheLDView/LDDeneMenu window.
Todeleteanarray,press<3>toentertheDelete LD Menu window.
Toviewcontrollersettings,press<4>toentertheControllerConguration window.
Figure 3
RAID Option ROM Version 3.3.1540.17
(c) 2011 Advanced Micro Devices, Inc. All rights reserved.
No Array is dened..
Press <Ctrl-F> to enter RAID Option ROM Utility...
Figure 2
View Drive Assignments........................... [ 1 ]
LD View/ LD Dene Menu...................... [ 2 ]
Delete LD Menu....................................... [ 3 ]
Controller Conguration............................ [ 4 ]
Option ROM Utility (c) 2011 Advanced Micro Devices, Inc.
Press 1..4 to Select Option [ESC] Exit
[ Keys Available ]
[ Main Menu ]