Gigabyte GA-X79S-UP5 User's - Page 44

BIOS Setup
- 44 -
& Vcore Loadline Calibration
Allows you to set the Load-Line Calibration level for the Vcore. The levels are (from highest to lowest):
Extreme, Turbo, High, Medium, and Standard. Selecting a higher level keeps the Vcore more consistent
with what is set in BIOS under heavy load. Auto lets the BIOS automatically congure this setting and sets
the voltage following Intel's specications. (Default: Auto)
& IMC Voltage Loadline Calibration
Allows you to congure Load-Line Calibration for the IMC voltage. This item allows you to adjust the V-droop
value. The higher the V-droop value, the lower the output voltage will be under heavy load.
Auto Lets the BIOS automatically congure this setting and sets V-droop following Intel
specications. (Default)
+0%~+180% Adjusts the V-droop value.
& DDR CH(A/B) Voltage Loadline Calibration
Allows you to congure Load-Line Calibration for Channel A and Channel B memory voltage. This item
allows you to adjust the V-droop value. The higher the V-droop value, the lower the output voltage will be
under heavy load.
Auto Lets the BIOS automatically congure this setting and sets V-droop following Intel
specications. (Default)
+0%~+180% Adjusts the V-droop value.
& DDR CH(C/D) Voltage Loadline Calibration
Allows you to congure Load-Line Calibration for Channel C and Channel D memory voltage. This item
allows you to adjust the V-droop value. The higher the V-droop value, the lower the output voltage will be
under heavy load.
Auto Lets the BIOS automatically congure this setting and sets V-droop following Intel
specications. (Default)
+0%~+180% Adjusts the V-droop value.
& CPU Vtt Loadline Calibration
Allows you to congure Load-Line Calibration for the CPU Vtt voltage. This item allows you to adjust the
V-droop value. The higher the V-droop value, the lower the output voltage will be under heavy load.
Auto Lets the BIOS automatically congure this setting and sets V-droop following Intel
specications. (Default)
+0%~+180% Adjusts the V-droop value.
& Vcore Protection
Allows you to set the voltage limit on the Vcore for over-voltage protection. The adjustable range is from
150.0mV to 500.0mV. Auto lets the BIOS automatically congure this setting. (Default: Auto)
& DDR CH(A/B) Voltage Protection
Allows you to set the voltage limit on Channel A and Channel B memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 500.0mV. Auto lets the BIOS automatically congure this setting.
(Default: Auto)
& DDR CH(C/D) Voltage Protection
Allows you to set the voltage limit on Channel C and Channel D memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 500.0mV. Auto lets the BIOS automatically congure this setting.
(Default: Auto)
& Vcore Current Protection
Allows you to set the current limit on the Vcore for over-current protection in terms of percentage. The
adjustable range is from 40.0% to 124.0%. Auto lets the BIOS automatically congure this setting. (Default:
Auto)