5-2-2 EZ Setup
The GIGABYTE EZ Setup utility includes the following 'EZ' setups applications that will offer greatly simplied
install and conguration procedures: Disk Mode Switch, EZ Smart Response, EZ Rapid Start, EZ Smart
Connect, and XHD.
Disk Mode Switch
Disk Mode Switch allows you to switch the operating mode for your hard drive even after it's been installed with
an operating system. Supported operating modes include IDE, AHCI, and RAID. You can select a disk mode
and restart your computer after the selection.
• Native UEFI mode is not supported.
• Be sure to reinstall the Intel
®
Rapid Storage Technology utility after you switch the disk mode.