Gigabyte MJ11-EC0 - Page 17

- 17 - Hardware Installation
3/4/5/6) SATA0/SATA1/SATA2/SATA3 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s standard.
Each SATA connector supports a single SATA device.
7
1
1
7
PinNo. Denition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
7) SGPIO1 (SATA SGPIO) Connector
Serial General Purpose Input/Output (SGPIO) is a communication method used between a host bus adapter
(HBA) and a main board.
Pin No. Denition
1 Data In
2 GND
3 Data Out
4 Load
5 Clock
1
5