Gigabyte MJ11-EC0 - Page 48

BIOS Setup - 48 -
Parameter Description
Core/Thread Enablement
Allows you to disagree or agree enabling processor cores and threads.
When agreed, you can control the number of cores to be used, and whether
to enable or disable Symmetric Multithreading Technology (SMT) support.

Downcore Control
– Options available: Auto, ONE(1+0), TWO(1+1), TWO(2+0),
THREE(3+0), FOUR(2+2), FOUR(4+0), SIX(3+3). Default setting is
Auto.

SMTEN
– Disable: Single hardware thread per core.
– Auto: Two hardware threads per core.
– Options available: Disable, Auto. Default setting is Auto.
Streaming Stores Control
Enable/Disable the Streaming Stores functionality.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Prefetcher settings
Press[Enter]forcongurationofadvanceditems.

L1 Stream HW Prefetcher
– Enable/Disable L1 Stream HW Prefetcher.
– Options available: Auto, Enable, Disable. Default setting is Auto.

L2 Stream HW Prefetcher
– Enable/Disable L2 Stream HW Prefetcher.
– Options available: Auto, Enable, Disable. Default setting is Auto.