- 55 - BIOS Setup
2-2-11-3-3 Memory MBIST
Parameter
Description
Memory MBIST
MBIST Enable
Enable/Disable the Memory MBIST function.
Options available: Enabled, Disabled. Default setting is Disabled.
MBIST Test Mode
(Note)
Selects MBIST Test Mode.
Options available: Interface Mode, Data Eye Mode. Default setting is Interface
Mode.
– Interface Mode: Tests Single and Multiple CS transactions and Basic
Connectivity.
– Data Eye Mode: Measures Voltage vs. Timing.
MBIST Aggressors
(Note)
Enable/Disable MBIST Aggressor test.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
MBIST Per Bit Slave Die
Reporting
(Note)
Enable/Disable to report 2D data eye results in ABL log for each DQ,
Chipselect, and Channel.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
(Note) This item is available when MBIST Enable is set to Enabled.
To Next Page
Loading...
