Gigabyte MJ11-EC0 - Page 61

- 61 - BIOS Setup
2-2-11-6 NTB Common Options
Parameter
Description
NTB Common Options
NTB Enable
Options available: Auto, Enable. Default setting is Auto.
NTB Location
(Note)
Options available: Auto, Socket0-Die0, Socket0-Die1, Socket0-Die2,
Socket0-Die3, Socket1-Die0, Socket1-Die1, Socket1-Die2, Socket1-Die3.
Default setting is Auto.
NTB active on PCIeCore
(Note)
NTB enable on PCIe Core.
Options available: Auto, Core0, Core1. Default setting is Auto.
NTB Mode
(Note)
Selects NTB Mode (Core0, Port0).
Options available: NTB Disabled, NTB Primary, NTB Secondary, NTB
Random, Auto. Default setting is Auto.
Link Speed
(Note)
Selects Link Speed for NTB Mode (Core0, Port0).
Options available: Max Speed, Gen 1, Gen 2, Gen 3, Auto. Default setting
is Auto.
(Note) This item is available when NTB Enable is set to Enable.