Gigabyte MJ11-EC0 User Manual

BIOS Setup - 66 -
Parameter
Description
NICConguration
Press[Enter]tocongureadvanceditems.

Link Speed
– Allowsforautomaticlinkspeedadjustment.
– Options available: Auto Negotiated, 10 Mbps Half, 10 Mbps Full,
100 Mbps Half, 100 Mbps Full. Default setting is Auto Negotiated.

Wake On LAN
– EnablespoweronofthesystemviaLAN.Notethatconguring
Wake on LAN in the operating system does not change the value
of this setting, but does override the behavior of Wake on LAN in
OS controlled power states.
– Options available: Enabled/Disabled. Default setting is Enabled.
Blink LEDs
IdentiesthephysicalnetworkportbyblinkingtheassociatedLED.
Pressthenumerickeystoadjustdesiredvalues.
UEFI Driver
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Adapter PBA
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Device Name
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Chip Type
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
PCI Device ID
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
PCI Address
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Link Status
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
MAC Address
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Virtual MAC Address
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.

Gigabyte MJ11-EC0 Specifications

General

Brand	Gigabyte
Model	MJ11-EC0
Category	Motherboard
Language	English