Gigabyte MZ73-LM1 - Page 69

BIOS Setup
- 69 -
2-2-18-1 iSCSI Boot Conguration Menu
Parameter Description
iSCSI General Parameters
Press[Enter]tocongureadvanceditems.

TCP/IP Parameters via DHCP
– Acquires TCP/IP Parameters via DHCP.
– Options available: Disabled, Enabled. Default setting is Enabled.

IPAutoconguration
– Auto-congurestheIPconguration.

iSCSI Parameters via DHCP
– Acquires iSCSI Parameters via DHCP.
– Options available: Disabled, Enabled. Default setting is Disabled.

CHAP Authentication
– Enable/Disable the CHAP authentication.
– Options available: Disabled, Enabled. Default setting is Disabled.

Boot to iSCSI Target
– Enable/Disable booting to iSCSI target after log-on.
– Options available:Disabled, Enabled, One Time Disabled. Default
setting is Enabled.

DHCP Vendor ID
– CongurestheDHCPvendorID(upto32characterslong).

Link Up Delay Time
– Conguresthelinkupdelaytimeinseconds(0-225).