Gigabyte MZ73-LM1 - Page 71

BIOS Setup
- 71 -
Parameter
Description
iSCSI First/Second Target
Parameters (continued)

Boot LUN
– CongurestheTargetbootLUNnumber(0-255).

iSCSI Name
– CongurestheiSCSIname.

CHAP ID
– CongurestheChallenge-HandshakeAuthenticationProtocol
(CHAP) ID (up to 128 characters in length).

CHAP Secret
– ConguretheChallenge-HandshakeAuthenticationProtocol
(CHAP) Secret (12 to 16 characters in length).
Secondary Device
Press[Enter]tocongureadvanceditems.

Secondary Device
– Inputs the secondary device MAC address.

Use Independent Target Portal
– Use Independent target portal when multipath I/O is enabled.
– Options available: Disabled, Enabled. Default setting is Disabled.

Use Independent Target Name
– Use Independent target name when multipath I/O is enabled.
– Options available: Disabled, Enabled. Default setting is Disabled.