Gigaset E490 - Setting Date and Time

12
First steps
Gigaset E490/E495 / AUS / A31008-M2105-C401-2-7619 / starting.fm / 04.01.2011
Version 4, 16.09.2005
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
¤ If you have not yet set the date
and time, press the key below
§Time§ to open the input field.
¤ The active line is marked [...].
Enter day, month and year as a
6-digit number via the keypad,
e.g. Q   QQO
for 01/10/2009.
¤ Press down on the control key
to enter the time.
¤ Enter the hours and minutes in
4-digit format via the keypad,
e.g. Q M  5 for 07:15
am.
Time
Date/Time
Date
[01.10.09]
Time
00:00
Ý Save
Date/Time
Date
01.10.09
Time
[07:15]
Ý Save
Ý Save
¤ Press the key below §Save§ on
the display screen to confirm
your setting.