Gigaset E490 - Setting Pauses

57
Connecting the base station to the PABX
Gigaset E490/E495 / AUS / A31008-M2105-C401-2-7619 / pabx.fm / 04.01.2011
Version 4, 16.09.2005
Setting pauses
Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key c
and sending the number.
v Open menu.
55 O  L
Press keys.
~ Enter digit for the pause length
(1 = 1 sec.; 2 = 3 sec.; 3 =7sec.)
and press
§OK§.
Changing the pause after the recall
key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v Open menu.
55 O  2
Press keys.
~ Enter a digit for the length of the
pause (1 = 800 ms; 2 =1600ms;
3 = 3200 ms) and press
§OK§.
Changing a dialling pause (pause
after access code)
Precondition: You have saved an access
code (
¢ page 56).
v Open menu.
55 O  
Press keys.
~ Enter a digit for the length of the
pause (1 = 1 sec.; 2 = 2 sec.;
3 = 3 sec.; 4 = 6 sec.) and press
§OK§.
To insert a dialling pause: press S for
2seconds. A P appears in the display.