Gigaset E490 - General Specifications

63
Appendix
Gigaset E490/E495 / AUS / A31008-M2105-C401-2-7619 / appendix.fm / 04.01.2011
Version 4, 16.09.2005
Base station power consumption
In standby mode:
Gigaset E490: approx. 0.8 watt
Gigaset E495: approx. 1.3 watt
During the conversation:
Gigaset E490: approx. 1.0 watt
Gigaset E495: approx. 1.5 watt
General specifications
Pin connections on the telephone
jack
DECT standard is supported
GAP standard is supported
No. of channels 60 duplex channels
Radio frequency range
1880–1900 MHz
Duplex method Time multiplex,
10 ms frame length
Repeat frequency of
the transmission pulse
100 Hz
Length of the trans-
mission pulse
370 μs
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW, average power
per channel
250 mW pulse power
Range up to 300 m outdoors,
up to 50 m indoors
Base station power
supply 230 V ~/50 Hz
Environmental condi-
tions in operation
+5°C to +45°C; 20% to
75% relative humidity
Dialling mode DTMF ( tone dialling)
1unused
2unused
3a
4b
5unused
6unused
3
2
1
4
5
6