54
Base station settings
Gigaset E490/E495 / AUS / A31008-M2105-C401-2-7619 / registr_sett.fm / 04.01.2011
Version 4, 16.09.2005
Restoring the handset
default settings
You can reset individual settings and
changes that you have made. This will not
affect entries in the directory, call-by-call list,
calls list, SMS lists or the handset's registra-
tion to the base station.
v
¢ Ð ¢ Handset ¢ Reset Handset
§Yes§ Press the display key.
a Press and hold (idle status).
Base station settings
The base station settings are carried out
using a registered Gigaset E49H handset.
Protecting against
unauthorised access
Protect the system settings of the base sta-
tion with a PIN known only to yourself. The
system PIN must be entered when, for exam-
ple, registering/deregistering a handset to/
from the base station or when restoring the
default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base station (default setting: 0000) to a
4-digit PIN known only by you.
Gigaset E495: Setting a system PIN facilitates
remote operation of the answering machine
(page 42).
v
¢ Ð ¢ Base ¢ System PIN
~ Enter the current system PIN
and press
§OK§.
~ Enter new system PIN. For secu-
rity reasons, the PIN is shown as
four stars (
****
).
s~ Jump to the next line, re-enter
new system PIN and press
§OK§.
a Press and hold (idle status).
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/paging
key on the base station while reconnecting
the power cable to the base station. Release
the key after a while.
The base station has now been reset and the
system PIN 0000 set.
Activating/deactivating
music on hold
v ¢ Ð ¢ Base ¢ Music on hold
Press §OK§ to activate or deactivate music on
hold ( = on).
Please note
All handsets are deregistered and must
be re-registered.
To Next Page
Loading...
