Gigaset E720 - Page 23

Gigaset E720-E720A / LUG_Kombi CH en / A31008-M2903-F101-1-2X19 / telephony.fm / 4/21/20
Template Module, Version 2, 20.02.2020
Making calls
21
Dialling from the call list
The call lists ( p. 35) contain the most recent accepted, outgoing and missed calls.
One touch call
A saved number is dialled by pressing any key. This allows children
who are not yet able to enter a number to call a certain number, for
example.
Activate one touch call mode:
Make a one touch call: Press any key . . . the saved number is
dialled
Cancel dialling: Press the End call key .
End one touch call: Press and hold the End call key
Incoming calls
An incoming call is indicated by ringing, by a display on the screen and by the flashing Talk /
Handsfree key ( / ).
The signal light (LED) at the top of the handset als
o flashes (if enabled).
Accept a call:
• Press the Talk key
• If Auto Answer is activated: Remove the handset from the charging cradle
• On a system with an answer machine: Forward to the answer machine:
Switch off ringtone: Si
lence . . . the call can be accepted for as long as it is shown on the
display
Information about the caller
The caller's phone number is displayed.
If the caller's number is saved in the local directory, the name is displayed.
¤ . . . use to select Call Lists OK . . . use to select a list OK . . .
use to select an entry Press the Talk key
The call lists can be displayed directly by pressing the display key Calls if the relevant
function has been assigned to the display key.
The Missed calls list can also be opened by pressing the Message key .
¤ . . . use to select Additional Features OK
One Touch Call OK . . . use to activate Activa-
tion Call to . . . use to enter the number Save
. . . the active one touch mode is shown in the idle display
The caller's number is sent ( p. 25).
07:15
INT 1 22 Feb
OneTouchCall active
0891234567
OFF
Example