Gigaset E720 - Operation with a PABX

Gigaset E720-E720A / LUG_Kombi CH en / A31008-M2903-F101-1-2X19 / extending.fm / 4/21/20
Template Module, Version 2, 20.02.2020
Operation with a PABX
73
Operation with a PABX
To find out which settings are required for a PABX, please refer to the PABX user guide.
You cannot send or receive SMS messages on P
ABXs that do not support Calling Line
Identification.
Setting Tone or Pulse dialling mode
Setting the flash time
Saving an access code (outside line code)
Setting the access code (e.g. "0") for dialling using the fixed line network.
¤ . . . use to select Settings OK Telephony OK Dialling
Mode OK . . . use to select Tone or Pulse Select ( = selected)
¤ . . . use to select Settings OK Tele phony OK Recall OK
. . . possible flash times are listed . . . use to select flash time Select ( = selected)
¤ . . . use to select Settings OK Telephony OK Access Code
OK . . . then
Fixed line network:
¤ Access external line with: . . . use to enter or change access
code, max. 3 digits
Rule:
¤ For . . . use to select when the access code should be
dialled
Call Lists: The access code will only prefix numbers from a list (list
of answered calls, list of missed calls, SMS list, answer machine list).
All calls: The access code prefixes all numbers dialled.
Off: The access code is deactivated and does not prefix any
telephone number.
Save:
¤ Save
The access code never prefixes any SMS service centre numbers.