Template Module, Version 2, 20.02.2020,
Provider-specific functions (network services)
Gigaset E720-E720A / LUG_Kombi CH en / A31008-M2903-F101-1-2X19 / netservices.fm / 4/21/20
26
Calling Line Identification for outgoing calls
Switching Calling Line Identification on/off for all calls
These settings apply to all registered handsets.
Deactivating Calling Line Identification for the next call
Call waiting during an external call
During an external call, a call waiting tone indicates another
external caller. If the number is being transferred, you will see the
number or the name of the caller on the display.
Reject waiting caller:
¤ Options Reject waiting call OK . . . the waiting
caller hears the busy tone
Accept the waiting call:
¤ Accept
Once you have accepted the waiting call, you can switch
b
etween the two callers (Call swapping p. 28) or speak to
both simultaneously (Conference p. 29).
Activating/deactivating call waiting
Call waiting is activated or deactivated for all registered handsets.
¤ . . . use to select Select Services OK All Calls Anonym.
Change ( = activated)
¤ . . . use to select Select Services OK Next Call Anonym. OK . . .
use to enter the number Dial . . . the connection is established without Calling Line
Identification
¤ . . . use to select Select Services OK Call Waiting OK . . . then
Switch on/off:
¤ Status: . . . use to select On or Off
Activate:
¤ Send
Call Waiting
1234567
Accept Options
To Next Page
