Gigaset E720 - Page 84

Template Module, Version 2, 20.02.2020,
System
Gigaset E720-E720A / LUG_Kombi CH en / A31008-M2903-F101-1-2X19 / settings_BS.fm / 4/21/20
82
Activating/deactivating music on hold
Setting the base ringtone
Changing the system PIN
Secure the telephone's system settings with a system PIN. You have to enter the system PIN
when you register or de-register a handset, change local network settings, perform a firmware
update or reset the phone to default settings.
Change the telephone's 4-digit system PIN (default setting: 0000):
Resetting system PIN
Resetting the base station to the original PIN 0000:
¤ Unplug the network cable from the base station Press and hold the Registration/Paging
key on the base station At the same time reconnect the network cable to the base
station Press and hold the key for at least 5 secs . . . the base station is reset and the system
PIN is set to 0000
¤ . . . use to select Audio Settings Settings OK Music on hold
Change ( = activated)
¤ . . . use to select Audio Settings Settings OK Ringtones (Base)
OK . . . then
Set the volume:
¤ Volume: . . . use to set the volume at 5 levels or set a crescendo
(rising volume).
Set the ringtone:
¤ Melody . . . use to select the ringtone
Save the setting:
¤ Save
The direct dial PIN defined on setting up the direct Supervision Call is independent
of it.
¤ . . . use to select Settings OK System OK System PIN
OK . . . use to enter the current PIN (if other than 0000) OK . . . use to enter
new system PIN Save
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.