Check
To check the hub oil level, proceed as follows:
1. Place the scooter on its stand on a level sur-
face;
2. Unscrew the dipstick «A», dry it with a clean
rag and then reinsert it, screwing it tightly
into place;
3. Unscrew the dipstick again and check that
the oil level barely reaches the 2nd notch
from the bottom;
4. Screw the dipstick back into place complete-
ly.
The screw «B» is the hub oil drainage tap.
CAUTION
USING THE ENGINE WITH INSUFFICIENT LUBRICATION
OR WITH THE WRONG LUBRICANTS MAY INCREASE
WEAR AND TEAR ON THE MOVING PARTS AND MAY
CAUSE SERIOUS DAMAGE.
CAUTION
USED OILS CONTAIN SUBSTANCES HARMFUL TO THE
ENVIRONMENT. FOR OIL REPLACEMENT, CONTACT AN
AUTHORISED SERVICE CENTRE, WHICH IS EQUIPPED
TO DISPOSE OF USED OILS IN AN ENVIRONMENTALLY
FRIENDLY AND LEGAL WAY.
N.B.
THE NOTCHES ON THE HUB OIL LEVEL DIPSTICK, EX-
CEPT THOSE INDICATING THE MAXIMUM AND MINIMUM
LEVELS, REFER TO OTHER MODELS BY THE MANUFAC-
TURER, AND HAVE NO SPECIFIC FUNCTION FOR THIS
MODEL.
Recommended products
AGIP ROTRA 80W-90 Rear hub oil
SAE 80W/90 Oil that exceeds the requirements of
API GL3 specifications
Characteristic
Rear hub oil
Quantity: approx. 85 cc
Maintenance DNA 50
MAIN - 30
To Next Page
