65
Issue: 8 (Applies to firmware 2387 6.09 onwards)
Document number: 1390-PS-0039
Click on Apply gives the following screen, click on OK:-
To Start Logging.
From the top menu select Log.
Click on Log/Start to commence logging.
To Stop Logging.
From the top menu select Log.
Click on Log/Stop to stop logging.
The logged data is saved to a PC text file that can be opened with Notepad or equivalent and the following example
illustrates the saved time/date stamped WindObserver data.
The Date and time information are taken from the PC Clock.
The logged Wind Data .txt file can be imported into Microsoft Excel if it is required to manipulate the data or graph plot
the data.
To Next Page
Loading...
