7
ASPEC® POSITIVE PRESSURE MANIFOLD | USER'S GUIDE
SAFETY
Hazard Symbols
The following hazard symbol may appear on the instrument or in this document:
Symbol Explanation Explication Erläuterung
Caution Attention Vorsicht
Chemical Hazards
Any chemicals used for analysis should be handled according to good laboratory
practice (GLP). They should also be stored, used, and disposed of in accordance
with the manufacturer’s specifications, as well as local and national regulations.
Potentially hazardous chemicals can be used with the instrument. Use care when
handling chemicals and wear appropriate personal protective equipment (PPE),
such as safety glasses, gloves, etc.
The responsible individual must ensure that personnel are not exposed to
hazardous levels of toxic substances as outlined in the material safety data sheets
(MSDSs), or any documentation provided by local governing bodies such as The
Health Protection Agency (United Kingdom) or The Occupational Safety and
Health Administration (United States).
Flammable Solvents
Secure all flammable solvents. The temperature of liquids inside the system must
be 25°C (77°F) below the lowest flame temperature of any solvents used.
Replacement Parts
Be sure to use only replacement parts mentioned in this user’s guide. Refer to
Replacement Parts and Accessories on page 38.
Signs of Damage
Do not attempt to use the instrument if there are visible signs of damage.
Site Requirements
Do not operate the instrument if site conditions are not within specifications.
Refer to Technical Specifications on page 19 for more details.
Storage and Movement
Empty the drain well before moving the instrument.
To Next Page
Loading...
